Before You Get Started
Before installing an 8860 Keypad, verify that you have everything needed to complete your keypad set up.
What’s Included
The following items are included with every 8860 Keypad. Additional components may be required depending on the installation method you choose.
Additional accessories can be purchased by contacting DMP Customer Service.
-
One 8860 7-Inch Touchscreen Keypad
-
One Mounting Plate
-
Hardware Pack - Contains four screws to secure the mounting plate to a wall and a four-wire harness
What You’ll Need
The following items are not included with the keypad but are necessary for some installations. Additional tools and accessories may be required depending on the installation site and method.
-
#2 Phillips Screwdriver OR
-
A Drill and Drill Bit
-
Use a 7/64” (2.5mm) drill bit for drywall mounting
-
Use a 1/4” (6 mm) drill bit for masonry mounting
-
➡️ What’s Next?
|